Triton Drain Insert
The TRITON Catch Basin Insert helps eliminate hydrocarbons and other contaminants such as antifreeze, metals, sand, silt and litter from storm water runoff. The TRITON is designed to be inserted below the grate of storm drain inlets.
 
  • Non-reactive High Density polyethylene plastic construction.
  • Round, Square, Rectangular and Custom models.
  • Filter Media Cartridges available for the removal of Hydrocarbons, Metals Antifreeze, Sand, Silt and Litter.
  • Media is non hazardous, per EPA and OSHA standards.
  • Easy servicing, removable Filter Media Cartridge allows for quick servicing.
  • Patented design with high nominal flow and high overflow capacities.
  • Easy to install in new and existing catch basins.
  • Maintenance contracts available.
  • Servicing of filters on a regular basis is a requirement to meet most local and state BMP's.
  • Meets Best Available Technology for use in Storm Water BMP (Best Management Practices).
  • Media Cartridges can be interchanged with GEO-TRAP series as site conditions change.
 
Curb Inlet Filter
The TRITON CURB Inlet filter insert helps eliminate hydrocarbons and other contaminants such as metals, sand, silt and litter from stormwater runoff. The TRITON Curb Inlet is designed to be inserted below the street/curb opening of storm drain inlets.
 
  • Non-reactive High Impact Polystyrene Plastic construction with U.V. inhibitors.
  • Over 40 percent of the plastic used comes from recycled content.
  • Filter Media-Pak available for the removal of hydrocarbons, metals, sand, silt, and litter.
  • Optional Antimicrobial Media-Pak, which aids in the prevention of bacterial growth and protection against odor causing water borne pathogens.
  • Optional StormWebT, polypropylene system designed to assist in the removal of trash and debris, in compliance with TMDL requirements.
  • Disposable Media-Pak is constructed from durable geotextile polypropylene fabric.
  • Media-Pak may be removed through the curb opening for ease of maintenance.
  • Media is nonhazardous, per EPA and OSHA standards.
  • Patent Pending design with high nominal flow and high overflow capacities.
  • Easy to install in new and existing curb inlets.
  • Meets Best Available Technology for use in Stormwater Best Management Practices (BMP).
  • Maintenance contracts, including recycling of all spent absorbents are available through REM Service Department.
  • Servicing of filters on a regular basis is a requirement to meet most local and state BMP's.
 
US HydroTech Environmental Solutions
© 2008 - All Rights Reserved		 1007 W College Ave #461
Santa Rosa CA 95401		 PH: (707) 793-4800
FX: (888) 473-3650
info@ushydrotech.com 		Website Design by Pro Web Networks
Storm Water Drain Insert Storm Water Erosion Control Impact Absorbent Technologies