The best way to tackle the toughest cleaning job is with the HHS Series of pressure washers. Completely portable, easy to use and one of the most reliable in the industry.
Pump: Belt drive triplex piston General pump · Adjustable high pressure detergent injector
Motor: Open drip-proof electric motor with thermal overload protection · 35-foot power cord
Frame: Wrinkle-finish powder coated steel frame assembly · 13-inch flat-free tires with rear tire brake
Components: Stainless-steel coil wrap heat exchanger with horizontal schedule 80 pipe coil · No. 1 or No. 2 fuel oil, diesel or kerosene fired burner (Not approved for bio-fuel) · Auto start/stop · Time delay shutdown · Hour meter · 10-gallon polyethylene fuel tank · Racor fuel filter/water separator · Wand holder · Adjustable thermostat · Polyethylene float tank with inlet filter screen
Miscellaneous: Temperature rise 150°F/66°C above ambient, maximum outlet temperature is 200°F
Unit Includes: Quick connect nozzles - 0°, 15°, 25°, 40° and low pressure nozzle · 50-foot x 3/8-inch high pressure hose with quick connects · Adjustable pressure insulated dual lance · Professional-grade insulated trigger gun with safety lock-off
MSRP: $10,005.00
PSI | 3000 |
GPM | 4.8 |
Horsepower/Motor | 10.0 HP, 460V, 3Ø, 16.5A |
Pump | General |
Plug Type | NEMA L16-20P |
Burner Fuel Tank Capacity | 10.0 gallon |
Fuel Consumption | 3.06 gph |
BTU Per Hour | 428,400 |
Drive Type | Belt Drive Pressure Washers |
Mobility | Portable Pressure Washers |
Water Temperature | Hot Water Pressure Washers |
Net Weight | 604.00 lbs. |
Shipping Weight | 724.00 lbs. |
Length | 57.00 in. |
Width | 30.00 in. |
Height | 41.50 in. |
Stainless-Steel Bottom Wrap HX-0162
Converts powder coated painted bottom wrap to stainless-steel
Skid Feet HX-0171
Stationary applications
250°F Steam HX-0176
Increases outlet temperature to 250°F
Skid Frame/Roll Cage Frame HX-0196
Stationary applications
Wireless Remote HX-0248
Ez-quip install
K7 Unloader, Flow Activated (auto start/stop N/A) HX-0255
Converts pressure trapping unloader system to flow actuated K7 unloader