For over 25 years, Northern California’s expert provider of industrial wash and wastewater solutions to reduce, contain and treat water

Propane Forced Air MH-0150-LMT0*

MH-0150-LMT0

Convenient and easy-to-use, Mi-T-M propane forced air heaters come in a variety of heat outputs.  The sleek design puts heat right where you need it.  Just add a propane cylinder and plug into the nearest outlet.

Frame: Heavy-duty steel construction with steel base · Easy-lift handle for portability at home or on the job site · Adjustable height angle for heat where you need it

Components: One touch ignition and heat control for easy operation · 10-foot hose and regulator · High performance fan · Automatic shut-off if power is interrupted or flame is extinguished · Enclosed gas controls · Electronic ignition · Propane inlet connector - connects heater to propane tank via a supply hose

Heat Output: Adjustable thermostat

For use in workshops, garages, construction sites and farms with proper ventilation.

Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.

Please see heater "Owner's Manual" included with each heater for a complete list of important safety information.

Important Notes:
-Not for use in residential living areas or inadequately ventilated areas.
-Proper ventilation required during operation.
-Must be plugged into an approved standard electrical outlet for operation.

MSRP: $1,091.00

*Includes thermostat

Specifications

Heat Output 150,000 BTU
Hot-Air Flow 400 CFM
AC Power 120V, 60Hz, Less than 1.0 Amps
Motor Size 1/9 HP
Fuel Propane
Fuel Consumption 6.9 lb./hr.
Required Cylinder Size 100 lb.
Maximum Operating Hours (per required cylinder size) 18.0 hours
Heating Area 3,800 sq. ft.
Adjustable Thermostat Yes
Adjustable Height Angle Yes
10-Foot Hose & Regulator Yes
Heat Source Propane

Weights & Dimensions

Net Weight 23.00 lbs.
Shipping Weight 29.00 lbs.
Length 25.10 in.
Width 8.70 in.
Height 15.40 in.

Request More Information