Dependability is key when you want to remove unwanted water fast and efficiently. This compact, lightweight and portable Mi-T-M 2-inch semi-trash pump is an excellent choice for homeowners, hobby farmers, contractors or anyone who needs to remove water fast. This pump can handle solids up to 3/4 inch. This pump is also great for breweries and wineries.
The frame is heavy duty powder coated wraparound design with 1-inch steel tubing. There are also rubber isolators to minimize vibrations.
Significant components are silicone carbide mechanical seals, precision molded cast iron impeller and volute for reduced vibration and wear. This pump is also available with a Honda GX120 OHV engine.
Suction discharge size is 2inches, maximum total head is 115ft, suction lift is 28ft, PSI is 50, maximum capacity is 9720 gph, fuel tank capacity is 0.71 gallons.
Contact US Hydrotech today either by coming by our showroom located at 5500 Commerce Blvd suite A in Rohnert Park or visiting our website at www.ushydrotech.com
The Mi-T-M 14000-watt gas generator is a virtual power plant. Built for industrial applications such as wineries, vineyards and breweries, with the portability to move from one job to the next, this generator will never let you down. It’s the perfect tool for professional contractors and whole-house dependability.
Engine: Honda GX630 OHV low oil shutdown engine with electric start (battery included) plus idle control
Alternator: Brushless 120v/240v alternator total harmonic distortion (THD) less than 5% – 100% copper windings
Components: Easy to read fuel gauge, voltmeter/hour meter, fuel tanks are powder coated outside, zinc-plated inside to prevent rusting, heaving duty industrial air cleaners hold up under extreme conditions, large low-tone mufflers to reduce noise to lowest level possible, easy access and protected control panel with magnetic circuit breakers and GFCI-protected receptacles
The all-electric HAE Series offers a fast and effective cleaning method without the emission of fuel and exhaust fumes. A patented heat exchange cartridge design provides consistent on-demand hot water, perfect for cleaning winery and brewery production floors and equipment. Visit www.ushydrotech.com or visit our showroom located at 5500 Commerce Blvd. Suite A in Rohnert Park, CA 94928 today for hands on education!
Motor: Open drip-proof electric motor, on/off power switch
Frame: Stainless-steel base and frame with rubber isolators
Component: Time delay shutdown
Heat Exchange: Used for consistent and efficient on-demand hot water, 120 degrees F to 130 degrees F temp rise above in-take, obtained within 3 – 5 minutes. Adjustable thermostat, on/off power switch, powder coated steel frame, revolutionary cartridge design, low maintenance, stainless-steel coils in aluminum casings for max efficiencies, eliminates constant cleaning, eliminates heat loss
Unit Includes: Quick connect nozzles, external downstream detergent injector, 50 foot of 3/8 inch wire braided high pressure black hose with quick connects, professional grade insulated trigger gun with safety lock-off, adjustable pressure insulated dual lance